Integral Cold Store Unit

• The cold room is suitable for a variety of applications; it can be used to freeze or refrigerate samples for healthcare, research, agriculture, and biotechnology purposes. In the walk-in cold room (WIC), the interior temperature can be controlled within a range of 2°C to 8°C. In the walk-in freezer (WIF), the temperature is set at -20°C.

Features of the Cold Room

• The set point of the cold room has an adjustable range of 0°C to 10°C (or -15°C to -25°C for the Freezer Room) with a resolution of 0.1°C.

• High-efficiency CFC-free polyurethane insulation foamed into place. With a density of 42kg/m3, a thickness of 100mm and an insulation K-value of 0.22 W/(m2)(K) or better.

• Internal and exterior surfaces are made up of hot-dipped galvanized steel sheet, coated in a white polyester coating. The floor is clad with non-slip material.

• Rooms are equipped with tungsten lighting.

• Rooms are equipped with shelving systems on 3 of their walls.

• Dual refrigeration system – while one system is working, the other one is reserved as a back-up.

• Forced air-cooling system

• Door equipped with a lock and heavy-duty hinges, with an internal safety release.

• CFC-free refrigerant

• Automatic defrosting

• A manual change-over switch is offered as standard, an automatic change-over switch is available as an optional extra.

• Temperature recorder and audible alarm system.

Technical Characteristics of the Refrigerating Unit

• An integrated condenser unit, called Mono block, integrating evaporator, condenser, compressor, electrical control units into one compact body, is used in cold storage rooms with temperature control of -5°C~5°C or -15°C~-20°C, in medical, clinical, agricultural and chemical industries where large scale cold storage is needed.

• Small compact structure.

• Comprises of TECUMSEH hermetic compressors, hight efficient, in-grooved copper tube and aluminium fin heat exchangers and leading brand refrigeration parts.

• The electronic control boards manage following parameters: automatic temperature setpoint and control,

electric heater defrosting, protection devices for over loading, over-heating, lack of phase, high and low pressure.

• Safe, easy to use and is economical, low cost installation and operation.

Temperature Recorder

• Upper and lower limits +50°C to -30°C

• Accuracy ±1°C

• Resolution ±0.5°C

• Minimum acceptable recording period between chart changes is 7 days

• USB interface is included